Gas plant, pipeline & power generation

GAS ENGINE OIL

SENTRON natural gas engine oils are formulated for natural gas engines, offering longer service life and cleaner engines

 

product image

Low ash gas engine oil suitable for use with catalytic converters and in severe high temperature conditions.

SENTRON LD 3000 (0.47% wt ash) is a high quality performing gas engine oil:

  • For use in 4-stroke and some larger 2-stroke gas engines
  • Extends drain intervals versus conventional Group I based competitor oils
  • Ideal for high output, turbocharged engines that prefer a low ash gas engine oil, delivering excellent control of engine deposits
  • Excellent high temperature control of varnish deposits to minimize valve sticking issues
  • Caterpillar verified (G3600, G3500 and lower)
  • Waukesha verified (L 7044GSI, L 7042GSI), Waukesha Co-Gen Approved
  • Suitable for engines with catalytic converters and for severe service applications
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/sentron.aspx
product image

Gas engine oil that provides exceptional overall engine protection and extended drains.

SENTRON LD 5000 (0.57% wt ash) is a premium performance 4-stroke natural gas engine oil:

  • Provides greatly extended protection to gas engines operating under regular, high temperature and severe conditions
  • Extends drain intervals – up to 200% or longer compared to leading conventional competitive gas engine oils
  • For use in Caterpillar, Caterpillar Power systems GmbH (MWM), MAN, MTU, Waukesha, and other turbocharged naturally aspirated, stoichiometric or lean burn engines, which require a low ash gas engine oil
  • GE Jenbacher approved in engine types 2, 3, 4, 6 (all versions) and 9 with Gas Type A including Formaldehyde Catalyst approval
  • Caterpillar G3600 engine verified and Waukesha L 7044GSI & L 7042GSI verified
  • Less used oil generated due to extended drain capability
  • Excellent piston cleanliness for reduced oil consumption and longer equipment life at extended drain intervals
  • Suitable for engines with catalytic converters and for severe service applications
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/sentron.aspx

 

GREASES

PEERLESS greases provide extended service life under the most extreme temperatures

 

product image

Provides excellent service life under the most extreme temperatures.

PEERLESS LLG is recommended for:

  • Sealed-for-life bearings found on automotive and industrial equipment
  • Constant velocity joints
  • Equipment running continuously at temperatures up to 200°C (392°F) and extremely wet conditions
  • Wheel bearing and auto chassis
  • NLGI GC-LB†
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/peerless.aspx
product image

Specially designed to be highly effective in wet and marine environments.

  • Formulated for the lubrication of loaded bearings, universal joints and chassis encountered in transport, marine and offshore applications operating in particularly wet and marine conditions
  • NLGI GC-LB (except PEERLESS OG 0 and PLUS)†
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/peerless.aspx
product image

A specially formulated valve grease for sour gas, LPG and water injection valves.

  • A valve grease specially formulated for lubricating the internal parts of valves employed in the production and distribution of sour gas in natural gas plants, as well as LPG and water injection systems in the oil and gas industry
  • Excellent protection against corrosion and the harmful effects of hydrogen sulphide
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/peerless.aspx
product image

Designed for industrial high-speed flexible gear couplings.

  • An ideal choice for use in high-speed flexible shaft couplings of the gear type, where severe centrifugal forces are generated
  • Meets the requirements of the ANSI/AGMA 9001-B97 standard for coupling grease specifications CG-1 and CG- 2
  • Excellent mechanical stability and resistance to oil separation
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/peerless.aspx
product image

For operations requiring general multi-application grease.

  • Good quality, cost-effective, lithium-based extreme pressure greases for wide operating temperature ranges and water resistance
  • Available in EP1, EP2 and Moly EP2
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/precision.aspx
product image

For automotive and industrial equipment over a wide range of operating conditions. It’s designed for passenger cars, vans, highway truck fleets and off-highway vehicles.

  • Versatile, premium performance, long-life, lithium/lithium-complex greases
  • Available in EP000, EP00, EP 1, EP 2, Heavy Duty and special application products EMB and Rail Curve
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/precision.aspx
product image

For tough and heavy duty shock-loaded equipment in industrial and off-highway applications.

  • Lithium greases are best suited for tough and heavy duty shock-loaded equipment in industrial and off-highway applications
  • EP 1 and EP 2 grades contain medium-viscosity oil, and are suitable for truck fifth wheel applications
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/precision.aspx
product image

For on-highway automotive equipment and off-highway vehicles in construction, farming, forestry and mining.

  • Synthetic lithium-complex greases that deliver high performance in wide operating conditions for enhanced protection and savings
  • Combines cold-weather performance without compromising high-temperature lubrication
  • For use in on-highway automotive equipment, and off-highway vehicles in construction, farming, forestry and mining
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/precision.aspx
product image

Enclosed gear fluid for heavily loaded gearboxes.

  • A semi-fluid grease for heavily loaded enclosed gearboxes on mining shovels, draglines and excavators
  • Recommended for enclosed gear drives of underground locomotives
  • Recommended for open gear lubrication on heavily loaded mills and tumblers
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/vultrex.aspx
product image

Red tacky greases specifically designed to lubricate heavy duty truck components.

  • Designed to lubricate heavy duty truck components, such as wheel bearings, bushings, king pins and chassis points, encountered in the mining, forestry and transportation industries. These applications involve vibration and shock loading, which require extreme pressure properties
  • VULTREX G-123: from -25°C to 160°C (-13°F to 320°F)
  • VULTREX G-124: from -20°C to 160°C (-4°F to 320°F)
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/vultrex.aspx
product image

Designed for use in heavy duty off-highway and mining equipment.

  • VULTREX MPGs are designed for heavy duty bearing and gear applications, as well as sliding surfaces moving at low-to-moderate speeds. Both greases meet the P&H 472 multi-purpose grease specification
  • VULTREX MPG EP1 is intended for use with centralized greasing systems or where higher grease mobility is required. Operating temperature range is -25°C to 160°C (-13°F to 320°F)
  • VULTREX MPG EP2 is similar to EP1, but has a thicker consistency. Its operating temperature range is -20°C to 160°C (-4°F to 320°F)
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/vultrex.aspx
product image

For greater load-carrying capacity under the hottest conditions.

  • Formulated with a higher base-oil viscosity for greater load carrying capacity under the hottest conditions: from -15°C to 150°C (5°F to 302°F)
  • Meets P&H 520 multi-service grease specification
  • Outstanding protection against wear and surface damage on gears and slides
  • Solvent-free formulation reduces lubricant consumption and fire risk
  • Adhesive properties resist wash-off from exposed surfaces under wet or snowy conditions
  • Contains a darkener for enhanced visibility on open gears, to prevent over-lubrication
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/vultrex.aspx
product image

For use during summer, or year-round use in warmer climates.

  • For summer or year-round use in warmer climates: from -25°C to 50°C (-13°F to 122°F)
  • Meets P&H 520 multi-service grease specification
  • Outstanding protection against wear and surface damage on gears and slides
  • Solvent-free formulation reduces lubricant consumption and fire risk
  • Adhesive properties resist wash-off from exposed surfaces under wet or snowy conditions
  • Contains a darkener for enhanced visibility on open gears, to prevent over-lubrication
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/vultrex.aspx
product image

Wide operating temperature range and multi-application capabilities enable year-round, multi-service use in most mines.

  • Wide operating temperature range enables year-round use, from -40°C to 40°C (-40°F to 104°F)
  • Meets P&H 520 multi-service grease specification
  • Outstanding protection against wear and surface damage on gears and slides
  • Solvent-free formulation reduces lubricant consumption and fire risk
  • Adhesive properties resist wash-off from exposed surfaces under wet or snowy conditions
  • Contains a darkener for enhanced visibility on open gears, to prevent over-lubrication
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/brands/vultrex.aspx

 

INDUSTRIAL GEAR OILS

Petro-Canada provides a complete line of lubricants for gear drives and bearing systems operating under the toughest conditions — whether under extreme pressure or wide ranges of temperature.

product image

Delivers sustained anti-wear extreme pressure protection.

  • High quality, extreme pressure lubricants for use in enclosed industrial gear drives operating under normal, heavy or shock-loading conditions
  • Provides long life, film strength and extreme pressure properties
  • Outstanding resistance to breakdown and protects against rust and corrosion
  • Minimizes sludge and varnish deposits with low foaming tendency
  • Water separability to prevent emulsion formation
  • Also recommended for lubricating plain or anti-friction bearings running under heavy or shock-loading conditions
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/categories/enduratex.aspx
product image

Non-EP lubricant where a wet environment requires enhanced corrosion protection.

  • A high viscosity non EP lubricant with film strength for a variety of enclosed worm gear reducers operating in wet environments, also suited for lubrication of steam cylinders
  • High adhesion to gear surfaces extends gear life and reduces maintenance costs
  • Protects "yellow" metal gear components from wear and chemical attack
  • Provides rust and corrosion protection
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/categories/enduratex.aspx
product image

Delivers reduced friction and excellent low temperature fluidity.

  • Uses advanced synthetic base oils and additives to reduce friction and improve energy efficiency over a wide temperature range
  • Outstanding anti-wear protection, to help extend equipment life
  • Stronger oxidation resistance which can lead to extended drain intervals for reduced downtime and maintenance costs
  • Designed for enclosed gearboxes and bearings operating under severe load conditions, and in wide temperature extremes
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/categories/enduratex.aspx
product image

Advanced all-season and EP protection for lubricating oil filled pump jack gearboxes and other wide temperature gearbox applications.

  • Eliminate seasonal change-outs and consolidate inventory with these multigrade EP gear oils
  • 68/150 delivers excellent low temperature properties versus leading all season competitive products for easier cold start-ups and better equipment protection
  • 68/220 protects gearboxes in extreme temperature environments; an all season gear oil that supports winter requirements (68 grade) and summer requirements (220 grade)
  • 68/220 has EP capacity to handle gearbox overloads and sufficient low temperature fluidity
  • 68/220 provides extended drain intervals and minimized downtime compared to conventional gear oils
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/categories/enduratex.aspx
product image

Fluids for wind turbine gearbox lubrication and protection.

  • Designed using polyalphaolefin (PAO) chemistry for good oil film thickness over a broad range of temperatures
  • Protects against micropitting and scuffing of gear teeth and provides extended bearing life under extreme conditions
  • Withstands breakdown at high temperatures to increase time between drain intervals, saving you time and labour
  • Minimizes energy use while reducing operating temperatures
Find out More:
http://lubricants.petro-canada.com/en-cy/our-products/categories/harnex.aspx

 

Comments